The DynamIX DynaView Workstation
displays FCR Images on the High Resolution Monitor and provides additional image
processing if required. The system is compact and can be operated simply by
mouse. The 20-inch horizontal monitor can display single images or can be split
into two, three or four sections. This enables the user to make faster inspection
decisions, with more confidence and greater efficiency.
Razor Sharp Images
Crisp, sharp images are displayed on the 20-inch easy-on-the-eye high resolution
CRT monitor. Newly employed non-interlace scanning technology has all but eliminated
flicker — assuring long comfortable viewing sessions. Images stored on hard
disk or DVD-RAM archive can be brought up to display in seconds, and up to four
windows can be programmed on the single CRT.
Pre-Selected Processing Protocols
All image processing, such as tonal conversion, frequency modification, enlargement,
rotation, reversal can be conducted by simple flat panel touch screen or mouse
operation.
Image Storage on Local Hard Disk or DVD RAM Archive
The system stores incoming images on the built-in hard disk for fast retrieval
of individual images. Images from an FCR reader are written to the hard disk in
background, allowing uninterrupted processing of currently displayed data. This
allows the user to manipulate images as desired while the newest images become
available. In addition, images may be stored on resident DVD RAM Archive.
Output of Processed Images on Film
Images with tonal, magnification and/or spatial frequency modifications may be
hardcopied on CR film. Either single-image format or two-image format may be selected.
SPECIFICATIONS
(Specifications subject to change without notice)
STANDARD CONFIGURATION:
1 - Control Unit (Pentium IV – 1.4 GHz, with 20GB HDD)
1 - Image Display CRT
1 - CD-RW
1 - DVD – RAM
1 - FDD 3.5 inch
1 - Internal Modem for diagnostic communications
OS: Windows 2000 Professional
IMAGE DISPLAY SECTION:
CRT: 20-inch, horizontal monochrome display
Resolution: 1568 pixels X 1152 lines
Scanning method: 67Hz non-interlaced
Frame memory: 1568 X 1152 X 8 bits
Cursor/Menu memory: 1568 X 1152 X 2 bits
Gray level: 12 bits (4,096 shades of gray)
Display format: 1,2,3, or 4 split display for one CRT
IMAGE RECORDING SECTION:
Hard Disk Capacity: Reversible compression (Approx. 1/2)
20 GB HDD: Approx. 700 images
DVD-RAM: 4.3 GB / side, Approx: 300 images / DVD
IMAGE PROCESSING CAPABILITIES:
Processor: Fuji DynamIX Image processing module
Processing features:
Spatial Frequency Processing: infinitely variable spatial frequency modification
Tonal Conversion Processing: Infinitely variable Tonal Conversion
Dynamic Range Control (DRC)
Multi-Objective Frequency Processing (MFP)
Magnification
Measurement
CONTROL/OPERATION SECTION:
SCSI 2 Interface Board Adaptec AHA-2910C
Graphic Controller 4MV VRAM AGP
Memory 256MB SDRAM
10/100 Base NIC/Sound
Image Control mouse: 2 button mechanical mouse
Keyboard: ASCII Full keyboard
EXTERNAL DIMENSIONS (W X D X H)
Image Reader: 550mm x 515mm x 1,065 mm
(21
5/8" x 20 5/16" x 41 7/8" )
IIP Monitor 400mm x 210mm x 410mm
(15
3/4" x 8 17/64" x 16 9/64")
WEIGHT:
Main unit: 180kg (397 lb.)
Keyboard: 1.5 kg (3 lb.)
POWER SUPPLY:
100 to 120 VAC or 200 to 240 VAC, 0.6 KVA
