Design innovations in the FPM6000SP NDT's fixer crossover rack cleaning system and film drying system are the keys to improved X-ray film processing. Reducing labor-intensive daily maintenance, speeding up operation and even improving film quality, these advances make this new processor ideal for high and low volume X-ray departments. The FPM6000SP NDT processes film fast and automates many routine operating and cleaning functions. Like other Fujifilm systems, the FPM6000SP NDT is designed for clean operation in the workplace and to minimize waste materials.
SPECIFICATIONS
(Specifications subject to change without notice)
FILM TRANSPORT:
Continuous roller transport system
PROCESSING TIME:
11 min. 45 sec. (150sec dev. Immersion time) and 7 min. 50 sec. (100 sec. dev. Immersion time) (leading edge to leading edge)
FILM SIZE:
Sheet film: 10 x 10 cm ~ 35.6 x 43.2 cm (14 x 17 in.)
PROCESSING CAPACITY:
SP Cycle (7 min., 50 sec.) 41 sheets/ hr. of 14 x 17 in.
RP cycle (11 min., 45 sec.) 28 sheets / hr. of 14 x 17 in.
TANK CAPACITY:
Developer: 12.7 Liters ( 3.4 US Gallons)
Fixer: 12.4 Liters ( 3.3 US Gallons)
Washer: 10.9 Liters ( 2.9 US Gallons)
SOLUTION TEMP. CONTROL:
Developer and Fixer temperature thermistor-controlled.
Control precision: developer ± 0.3°C (±0.5°F)
SOLUTION RECIRCULATION:
Continuous solution recirculation and agitation by recirculation pumps
FILM DETECTION:
Infrared sensors at entrance
REPLENISHMENT SYSTEM:
Automatic replenishment based on area of film processed
WASH WATER REQUIREMENT:
Temperature 15°C or higher, up to 5°C lower
than set developer temperature
Flow Rate: 3 Liter (0.8 US Gallon)/ min. during processing
DIMENSIONS (W x D x H):
780 x 793 (1121*) x 1076 mm
(30 11/16 x 31 1/4 (44 1/8*) x 42 3/8 in.)
* Including feed tray and film receiver
WEIGHT:
221 kg (487 lbs.) without solutions
257 kg (567 lbs.) with solutions
POWER REQUIREMENTS:
200/240V AC, Single phase, 30A 50/60 Hz
380/400/415V AC, 3-phase Y+N 10A, 50Hz
STANDARD ACCESSORIES:
Manual Handle, Tool Box, and Hoses
OPTIONAL ACCESSORIES:
Partitioning Panels
SAFETY SPECIFICATIONS:
Complies with UL and Tuv GS safety regulations, CE mark
The non-return water connection complies with the DIN standard for connecting to drinking water systems of the DGVW.
NOISE SPECIFICATIONS:
58dB(A) or lower during operation and standby
