The FIP 7000 is the most
advanced high volume automatic film processor designed exclusively for the development
of industrial X-ray film. The Fuji industrial X-ray processing system makes
possible unprecedented 5-minute processing from developing to drying and consistently
produces high quality images. Of course, it can also be used for conventional
11-minute processing or two additional dual speed combinations are available by
DIP switch selection.
SPECIFICATIONS
(Specifications subject to change without notice)
TYPE:
Continuous opposed roller feeding type.
PROCESSING SPEED:
Selectable either 5 or 11 minutes from development to drying using film with a
maximum width of 17 inches. Also includes two additional dual speed cycles available
by DIP switch selection.
TANK CAPACITY:
Developer = 30 liters (8 gallons) Fixer = 24 liters (61/2 gallons)
Rinse water = 22.5 liters (6 gallons)
RINSE WATER TEMPERATURE:
31°C (87.8°F)
RINSE WATER VOLUME:
10 liters (2 1/2) / minute or more (when processing film)
DEVELOPER TEMPERATURE CONTROL:
A constant temperature is automatically maintained by a heat converter (1000W
heater/cooling water) and thermistor. The temperature is displayed at the digital
display.
FIXER TEMPERATURE CONTROL:
A constant temperature is automatically maintained by a heat converter (1000W
heater/cooling water) and thermistor.
DRYING AIR TEMPERATURE CONTROL:
The ON/OFF status of the heater (2250W) is controlled by a thermister so that
the heater runs continuously at the set temperature only while film is being processed.
RINSE WATER TEMPERATURE CONTROL:
The mixing valve mixes hot water and cold water to maintain a constant temperature.
CIRCULATION MECHANISM:
The developer and fixer are continuously stirred by the circulation pump to maintain
a uniform mixture of the processing fluids, during circulation the developer passes
through a filter.
REPLENISHMENT MECHANISM:
Film detection by a photoelectric unit activates the replinisher pump for automatic
replenishment. The replenishment capacity can be arbitrarily set using an adjustment
knob.
DRYING MECHANISM:
A warm air drying method which employs a sirocco fan and slit pipes.
SAFETY CIRCUITRY:
Developer and Fixer overheat prevention circuit. Circuit breaker formed by a safety
thermostat (45°C / 113°F). Protection against overheating during drying.
Circuit breaker formed by a safety thermostat (80°C/176°F) and three
temperature fuses (150°C/302°F).
POWER SUPPLY:
1-phase, 2-wire AC 200/208/220/230/240 V, 50/60 Hz 30A
EXTERNAL DIMENSIONS:
Width = 800mm (31.5 inches)
Height = 1,200mm (47.2 inches)
Depth = 802mm (31.6 inches) [ 1,165mm (45.9 inches) including the film insertion
table and drying cover]
WEIGHT:
Main unit only = 314 kg (648 lb.) With processing chemicals = 390 kg (816 lb.)
