FIP7000

The FIP 7000 is the most advanced high volume automatic film processor designed exclusively for the development of industrial X-ray film.

The Fuji industrial X-ray processing system makes possible unprecedented 5-minute processing from developing to drying and consistently produces high quality images. Of course, it can also be used for conventional 11-minute processing or two additional dual speed combinations are available by DIP switch selection.

(Specifications subject to change without notice)

Type
Continuous opposed roller feeding type.

Processing Speed
Selectable either 5 or 11 minutes from development to drying using film with a maximum width of 17 inches. Also includes two additional dual speed cycles available by DIP switch selection.

Rinse Water Temperature
31°C (87.8°F)

Rinse Water Volume
10 liters (2 1/2) / minute or more (when processing film)

Developer Temperature Control
A constant temperature is automatically maintained by a heat converter (1000W heater/cooling water) and thermistor. The temperature is displayed at the digital display.

Fixer Temperature Control
A constant temperature is automatically maintained by a heat converter (1000W heater/cooling water) and thermistor.

Drying Air Temperature Control
The ON/OFF status of the heater (2250W) is controlled by a thermistor so that the heater runs continuously at the set temperature only while film is being processed.

Rinse Water Temperature Control
The mixing valve mixes hot water and cold water to maintain a constant temperature.

Circulation Mechanism
The developer and fixer are continuously stirred by the circulation pump to maintain a uniform mixture of the processing fluids, during circulation the developer passes through a filter.

Replenishment Mechanism
Film detection by a photoelectric unit activates the replinisher pump for automatic replenishment. The replenishment capacity can be arbitrarily set using an adjustment knob.

Drying Mechanism
A warm air drying method employs a sirocco fan and slit pipes.

Safety Circuitry
Developer and Fixer overheat prevention circuit. Circuit breaker formed by a safety thermostat (45°C / 113°F). Protection against overheating during drying. Circuit breaker uses a safety thermostat (80°C/176°F) and three temperature fuses (150°C/302°F).

Power Supply
1-phase, 2-wire AC 200/208/220/230/240 V, 50/60 Hz 30A

External Dimensions (W x D x H)
Width = 800mm (31.5 inches)
Height = 1,200mm (47.2 inches)
Depth = 802mm (31.6 inches) [ 1,165mm (45.9 inches) including the film insertion table and drying cover]

Weight
Main unit only = 314 kg (648 lb.) With processing chemicals = 390 kg (816 lb.)

Optional
Fuji Autofeeder IX, stand for Autofeeder, hot water panel, rack, hoist, Easily adaptable to re-circulating silver recovery systems and wash water re-circulating systems widely available