FPM6000

(Specifications subject to change without notice)

Film Transport
Continuous roller transport system

Processing Time
11 min. 45 sec. (150sec dev. Immersion time) and 7 min. 50 sec. (100 sec. dev. Immersion time) (leading edge to leading edge)

Film Size
Sheet film: 10 x 10 cm ~ 35.6 x 43.2 cm (14 x 17 in.)

Processing Capacity
SP Cycle (7 min., 50 sec.) 41 sheets/ hr. of 14 x 17 in.
RP cycle (11 min., 45 sec.) 28 sheets / hr. of 14 x 17 in.

Tank Capacity
Developer: 12.7 Liters ( 3.4 US Gallons)
Fixer: 12.4 Litres ( 3.3 US Gallons)
Washer: 10.9 Litres ( 2.9 US Gallons)

Solution Temperature Control
Developer and Fixer temperature thermistor-controlled.
Control precision: developer ± 0.3°C (±0.5°F)

Solution Recirculation
Continuous solution recirculation and agitation by recirculation pumps

Film Detection
Infrared sensors at entrance

Replenishment System
Automatic replenishment based on area of film processed

Wash Water Requirement
Temperature 15°C or higher, up to 5°C lower than set developer temperature
Flow Rate: 3 Litre (0.8 US Gallon)/ min. during processing

Dimensions (W x D x H)
780 x 793 (1121*) x 1076 mm (30 11/16 x 31 1/4 (44 1/8*) x 42 3/8 in.)
* Including feed tray and film receiver

Weight
221 kg (487 lbs.) without solutions
257 kg (567 lbs.) with solutions

Power Requirements
200/240V AC, Single phase, 30A 50/60 Hz
380/400/415V AC, 3-phase Y+N 10A, 50Hz

Standard Accessories
Manual Handle, Tool Box, and Hoses

Optional Accessories
Fuifilm IX Autofeeder, Partitioning Panels, Easily adaptable to re-circulating silver recovery systems and wash water re-circulating systems widely available

Safety Specifications
Complies with UL and Tuv GS safety regulations, CE mark
The non-return water connection complies with the DIN standard for connecting to drinking water systems of the DGVW

Noise Specifications
58dB(A) or lower during operation and standby